If the application uses a 2-3/8” (60mm) diameter pole, then an adapter will be required for
installation. The adapter will slide onto the 2-3/8” (60mm) pole to increase the outside diameter
to 2-7/8” (73mm). The adapter is a compression fitting that clamps to the pole as the device
tightens around the adapter.
If the application uses a pole that has been shortened or cut off allowing less than 3-1/2”
(90mm) of exposed pole, then an extender will be required during installation. Clean the burrs
off the inside diameter of the pole if necessary. The extender draws a wedge outward against
the inside diameter of the pole as the set screw is turned. The extender may require assembly.
Customers that have applications using Wi-Fi® must contact their service partner or Flexco
customer service for setup procedures.
Section 4 – Installation Instructions – BRAND NAME
