Flex innovations FlexJet Pro 90 mm, Инструкция по эксплуатации, Страница: 4 / 23

4
(3) 12” servo extension leads , Rx Battery)
1/8” to 3/16” (3-5mm) Striping tape for fan to duct shimming
2-sided mounting tape
Hook and loop tape
Hook and loop straps
Clear vinyl tape
Recommended Optional Equipment:
Aura 8 AFCS 3-axis gyro (FPZAURA08 recommended)
Battery Charger ISDT T8 (ISDTT8)
Main Wheels with Brakes Includes brake controller (FPMWB55)
Tools:
Drill and Bits ( 1/16” or 1.5mm)
Hobby knife
Phillips Screwdriver
Hex Drivers: 2.5mm, 2mm
Sandpaper
Masking tape
Adhesives:
Thin CA
Medium CA
15 minute epoxy
USING THIS MANUAL
This manual is divided into sections to make the assembly of the airplane easier to follow. Note the boxes

next to each
step to help you keep track of the steps that have been completed.
ATTENTION
Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to
assemble or operate the product correctly can result in damage to the product, personal property, and cause
serious or fatal injury.
All instructions, warranties and other collateral documents are subject to change at the sole discretion of Flex Innovations,
LLC. For up-to-date product literature, please visit our website at www.flexinnovations.com and click on the support tab for
this product.
WARNING
This is NOT a toy. This product is not intended for use by children under 14 years without direct adult supervision.
IMPORTANT INFORMATION REGARDING WARRANTY
Please read our Warranty and Liability sec
ti
on before building this product. If you as the Purchaser or user are not prepared
to accept the liability associated with the use of this product, you are advised to return this product
immediately in new and unused condition (in the original packaging) to the place of purchase.
SAFETY WARNINGS AND PRECAUTIONS
Protect yourself and others by following these basic safety guidelines.
1. This manual contains instructions for safety, opera
ti
on and maintenance. It is essential to read and follow all the
instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid
damage or serious injury.