Fleetwood BPS-06, Инструкция по эксплуатации

Страница: 13 / 16

7.4 Operation
7.4.1 Advice
Be sure your hair is not loose in order to avoid getting caught by turning parts which could
lead to a serious accident. Tie your hair up well and/or cover your head with a scarf.
The operation performed by not trained or skilled personnel shall be forbidden.
Never touch turning parts with your hands or in any other way.
NEVER operate machine without all original safety devices under perfect conditions.
7.5 After Finishing The Work
7.5.1 Precautions
Always TURN THE MACHINE OFF by removing the plug from the socket before cleaning
the machine. Never clean the machine unless it has come to a complete stop. Put all
components back to their functional positions before turning it ON again. Check level of oil.
DO NOT place your fingers in between belts and pulleys nor chains and gears.
10
7.6 Maintenance
7.6.1 Danger
Any maintenance with the machine in working situation is dangerous. TURN IT OFF BY
PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
7.6.2 Advice
Electrical or mechanical maintenance has to be undertaken by qualified personal. Person
in charge has to be sure that the machine is under TOTAL SAFETY conditions when
working.
8.1 Problem, causes and solutions
The Planetary Mixer is designed to operate with the need of minimum maintenance but the
natural wearing caused by longer use of the equipment may occasionally cause some
malfunctions.
If such problem occurs with your mixer refer to Table 02 in which the most common
situations are listed with recommended solutions.
8. Analysis and Problems Solving
17
Chave de fenda*
* Não acompanha a máquina.
Fig-06 Fig-05
Fig-07 Fig-08 Fig-09
IMPORTANTE
Nunca use chorros de agua directamente sobre la maquina.
4. AJUSTE DE LA ALTURA DE LOS BATIDORES
IMPORTANTE
La batidora Planetaria BPS-05 viene ajustada de fabrica, pero, si por algunos
motivo el batidor tocar el fondo de la olla, Usted puede ajustarlo, como por
ejemplo mostramos a seguir.
- Verificar si la palanca de controle de velocidad está en 0(cero) y, si el enchufe
de la maquina está desenchufado de la toma de corriente.
- Destrabar la manija TRABAR/DESTRABAR (Fig.01 No.06).
- Inclinar la parte superior de la máquina hacia atrás.
- Con un destornillador, girar el tornillo que se ubica en la parte superior del
suporte despacio en el sentido ante horario, para levantar el aditamento, o en el sentido
horario para bajarlo, y así regular el tornillo hasta ubicar el punto ideal que es cuando
los aditamentos tocan el fondo de la olla.