Flashforge Finder 3, Руководство пользователя

Страница: 19 / 40

Q：
A：
What if the nozzle cannot be heated?
1. Please check the temperature on display screen; if the temperature is shown
abnormal, it is in the reason of thermistor. Please replace the thermistor and try
again;
2. If the temperature is shown normal, it may be in the reason of heating cable.
Please replace the heating cable and try again.
Q：
A：
Q：
A：
Q：
A：
Q：
A：
What if the model warps or is unable to stick to the build plate?
1. The temperature of the build plate was too low; please rise its temperature;
2. Filament failed to adhere to the build plate, use glues to enhance the adhesion;
3. Distance between the build plate and the nozzle is too far or the build plate is
not leveling enough; re-leveling the build plate accordingly.
What if the screen turns dark?
1. Please check whether the screen flat cable has those questions: loose, plugged
in reverse, plugged in wrong position, tilted plugging;
2. Refresh the firmware to see if the screen can recover to normal;
3. Contact the after-sales personnel if necessary.
What if the build plate cannot be heated?
Please check the digital display of the temperature. If the temperature is improper,
please replace the thermistor. Otherwise, please replace the heating plate wires.
What if the files are garbled and cannot be read?
1. The format of files after slicing is not compatible;
2. Repair the model before slicing.
Q：
A： What if the accuracy of model is not good?
Please ensure proper tension of the synchronous belt, neither loose nor tight.
第一章 设备简介
Chapter 4 FAQ
17