31
3. Click the -[Manual] on the screen and click the Z-axis rising arrow to
manually move the extruder to the Position 1 (that is, above the leveling screw);
Stop when the Z axis rises to the position where it will touch the nozzle; Insert the
leveling card between the platform plate and nozzle, and adjust M5*60 left
screw under the profile at the same time; When feeling resistance during sliding
the leveling card, it indicates that it is the appropriate position. Then adjust the
right screw under the profile in the same way as the left screw;
4.
5.
6.
Move the extruder to the Position 2 manually, and be sure to move it slowly. If the
extruder scratches the platform, it is necessary to adjust the M5*60 left screw
under the profile at the Position 2, slide the leveling card to confirm that the
distance between the nozzle and the platform is appropriate, and then adjust
the right screw;
Adjust the Position 3 and Position 4 in the same operation method in turn;
After finishing the adjustment of the four positions, please tighten the four
screws above the platform to lock the platform.
1
Hexagon Socket Head Cap Screw M5*60
Platform Plate
Profile
1
4
2
3
