Flashforge Creator 3 Скачать руководство пользователя | Manualshive

Страница: 2 / 100

background image

PREFACE

Note:

On the completion of this User Guide, thanks all FlashForge engineers and the FlashForge 3D printer users for their

unremitting eﬀorts and sincere assistance.

The FlashForge Creator 3 User Guide is designed for the Creator 3 users to start their printing journey with FlashForge

Creator 3. Even if you are familiar with earlier FlashForge machines or 3D printing technology, we still recommend that

please read this guide, as there is lots of important information about the Creator3 for you to get a better 3D experi-

ence.

For a better and more successful printing experience, you can refer to the following materials:

(1) User Guide:

Users will ﬁnd the User Guide together with the printer accessories. The User Guide will help you start your print journey
as soon as possible.

(2) Oﬃcial FlashForge Website:

FlashForge Chinese website：www.sz3dp.com
FlashForge English website：www.ﬂashforge.com
The oﬃcial FlashForge website contains the up-to-date information concerning FlashForge software, ﬁrmware, device
maintenance and so on. Users are also able to get the contact information from there.

Each device must be tested before leaving factory. If there are some residues in extruder or some tiny scratch

-

es on the build tape, it is normal and won’t aﬀect the printing quality.

NOTICE

Keep your work place tidy.
Do not operate Creator 3 in the presence of ﬂammable liquids, gases or dust.
Keep Creator3 out of children and untrained persons' reach.

PLEASE STRICTLY FOLLOW ALL THE SAFETY WARNINGS AND NOTICE BELOW ALL THE TIME.

WORK ENVIRONMENT SAFETY

Always use the Creator3 with a properly grounded outlet. Do not reﬁt Creator3 plug.
Do not use Creator3 in damp or wet locations. Do not expose Creator3 to burning sun.
In case of device damage, please use the power supply provided by FlashForge.
Avoid using the device during an thunderstorm.
In case of uncertain accident, please unplug the device if you do not use it for long.

ELECTRICAL SAFETY

Do not touch the nozzle and build plate during printing.
Do not touch the nozzle after ﬁnishing printing.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
Do not operate the device while you are tired or under the inﬂuence of drugs, alcohol or medication.

PERSONAL SAFETY

01

«
1
2
3
4
...
»

Содержание Creator 3





































































































Отзывы:

Нет отзывов

Похожие инструкции для Creator 3

Бренд: IBM Страницы: 102

Бренд: Magicard Страницы: 30

Бренд: Magicard Страницы: 35

MAGICARD ID Card Printer

Бренд: Magicard Страницы: 30

Бренд: Magicard Страницы: 6

Бренд: TallyGenicom Страницы: 310

Бренд: TallyGenicom Страницы: 330

Бренд: Panasonic Страницы: 240

Бренд: HPRT Страницы: 2

AccurioPrint 2100

Бренд: Konica Minolta Страницы: 32

Daisy Wheel 410

Бренд: Radio Shack Страницы: 140

FELIX Pro 3 Touch

Бренд: Felix printers Страницы: 29

ColorPainter M-64S

Бренд: Oki Страницы: 84

Бренд: A&D Страницы: 31

VarioPrint 4110

Бренд: Oce Страницы: 216

Бренд: Pantum Страницы: 164

Бренд: Evolis Страницы: 45

Бренд: Avery Dennison Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды