Flash N61e, Инструкция по эксплуатации

Страница: 8 / 23

N61e V1.0 or Higher
6/23
--Holding on, Press briefly (
longer than 5 Sec
)
z
Charge Start, Charge Stop.
z Reset Battery Memory.
z Clear the Error Message.
--Turn clockwise or anti-clockwise
z
Scroll through memory position on the memory list
z
Page up and down in submenu.
z
Adjust parameter value in turn.
EXIT BUTTON:
--Press EXIT BUTTON instantly
z Return to upper menu.
z Disable to edit parameter.
QUICK REFERENCE GUIDE
z Connect N61e to a 12VDC power source. Observing proper polarity.
z Connect the batteries to N61e. Observing proper polarity. Built-in
balancer is available for Lithium batteries.
z Find out a suitable Battery Memory. Or create and edit a new one.
z Press ROTATING DIAL (5 sec) to start charge or discharge.
WELCOME SCREEN
As
soon as N61e powers on properly, the
welcome screen will appear on the LCD briefly.
It shows the manufacturer logo ‘
DUALSKY
’ and
the device name ‘
N61e
’, as well as the software
version ‘
V
×.× ’.
At this time the cooling fan will run for a short time and both signal lights
will flash on and go off. In this case you can check out whether they are
operating properly.
The system will then go to the most recently-used memory. At the initial use,
it will go to the Top Menu by default.
MENU STRUCTURE
The
menu is constructed of two stages/layers, Top Menu and Sub-menu.
DUALSKY
N61e V1.0