Flash N61e, Инструкция по эксплуатации

Страница: 7 / 23

N61e V1.0 or Higher
5/23
The N61e provides convenient and professional charging functions, which
are based on different batteries capacity and charging capabilities:
FAST/
STD/ SLOW/ STORAGE
. Instead of tedious manual setting, the operating
current is fixed at a variant charge rate (C). In the
MANU
function, you can
adjust the current from -3A to +10 A. The Discharge function is available in
the
MANU
or
STORAGE
functions. During operation, the current can be
adjusted except when using Constant Voltage. The detail below refers to
Table.N61e Operating Function Option
.
Table. N61e Operating Function Option
FAST STD
SLO
W
STORAGE CYC MANU
Li-Po
/ Li-Ion
/ Li-FePO4
2C 1C 0.5C 0.5C CHG or
1C DCHG to
3.8V/S
× -3.0 ～
10.0A
Adjust
-able
NiCd / NiMH
1C 0.5 C 0.2C As FAST √
Lead-acid
× 0.3C 0.1C × ×
For lithium batteries, at
STG
, the batteries will be charged or discharged to
3.8V. At this point, the pack is approximately half-full, which state of charge
is ideal for long storage periods.
Still for lithium batteries, the
FAST
function is only recommended to new
chemistry packs which can be to charged up to 2C according to the
manufacturer.
Whatever you set, the actual operating current will be limited to Max power,
which is associated with input voltage and no more than 90Watts (15VDC).
70Watts @ 12VDC. Max discharge power is limited to 30Watts.
KEY FUNCTION
The ROTATING DIAL and the EXIT BUTTON are multi-purpose controls.
ROTATING DIAL
--Press instantly
z Enter into the selected memory on the memory list.
z Start or stop editing parameters within a memory.
z Start or stop adjusting operating current as charging or discharging.
Function
Charge
Rating
Battery