www.flash-butrym.pl
Page 8
White Balance
Select White Balance, press the ENTER buton to confirm, present mode will blink on
the display. Use DOWN and UP buton to select the Red or Green or Blue. Once the
mode has been selected, press the ENTER buton to setup, use the DOWN and UP
buton to change the value (125~255). Once the mode has been selected, press the
ENTER buton to setup, go back to the functions whitout any change press the MENU
buton again. Hold and press the MENU buton about one secondo or wait for one
minute to exit the menu mode.
Manu Test
Select Manu Test, press the ENTER buton to confirm, present mode will blink on the
display.
Use
DOWN
and
UP
buton
to
select
the
Pan/Tilt/Red/Green/Blue/White/Dimmer or Strobe. Once the mode has been
selected, press the ENTER buton to setup, use the DOWN and UP buton to change
the value (0~255). Once the mode has been selected, press the ENTER buton to
setup, go back to the functions whitout any change press the MENU buton again.
Hold and press the MENU buton about one secondo or wait for one minute to exit the
menu mode.
Auto Test
Press the MENU buton up to when the Auto-Test is blinking on the display. Pressing
ENTER buton and the unit will run self-test by built-in program. To go back to the
functions press the MENU buton again. Hold and press the MENU buton about one
secondo or wait for one minute to exit the menu mode.
Temperature
Press the MENU buton up to when the Temperature Test is blinking on the display.
Pressing ENTER buton and the unit will run self-test by built-in program. To go back
to the functions press the MENU buton again. Hold and press the MENU buton about
one secondo or wait for one minute to exit the menu mode.
Defaults Setting
Press the MENU buton to show Defaults on the display. Press the ENTER buton and
the display will blink. Use the DOWN and UP buton to select the YES or No. Once
the Yes has been selected, press the ENTER buton and use the UP and Down buton
to select the PRO Defaults or AUTO Defaults.
PRO Defaults
: For professional users, detailed explanation as followings:
•
Slave Mode – Slave 1
•
Black Out – Yes
•
Sound State – Off
•
Pan Inverse – No
•
Tilt Inverse – No
