www.flash-butrym.pl
Page 13
•
You may have a break in the DMX cabling. Check the LED for the
response of the Master/ Slave mode signal.
•
Wrong DMX address in the unit. Set the proper address.
D. No response to the sound
•
Make sur the unit dose not receive DMX Signal
•
Check microphone to see if it is good by tapping the microphone
E. One of the channels is not working well
•
The stepper motor might be damaged or cable connected to PCB is
broken
•
The motor’s drive IC on the PCB might be out of conditio
12. Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried
out periodically to optimize light output. Cleaning frequency depends on the
environment in which the fixture operates: damp, smoky or particularly dirty
surrounding can cause greater accumulation of dirt on the unit’s opyics.
•
Clean with soft cloth using normal glass cleaning fluid
•
Always dry the parts carefully
•
Clean the external optics at least every 20 days. Clean the internal optics at
least every 30/60 days.
