www.flash-butrym.pl
Page 7
press the MENU buton about one secondo or wait for one minute to exit the menu
mode.
Sound Sense
Select Sound Sense, Press the ENTER buton to confirm, present mode will blink on
the display. Use the DOWN and UP buton to select the 0…1000 mode. Once the
mode has been selected, press the ENTER buton to setup, to go back to the
functions without any change press the MENU buton again. Hold and press the
MENU buton about one secondo or wait for one minute to exit the menu mode.
Pan Inverse
Select Pan Inverse, Press the ENTER button to confirm, present mode will blink on
the display. Use the DOWN and UP buton to select the Yes (Pan Inversion) or No
(Normal) mode. Once the mode has been selected, press the ENTER buton to setup,
to go back to the functions whitout any change press MENU buton again. Hold and
press the MENU buton about one secondo or wait for one minute to exit the menu
mode.
Tilt Inverse
Select Tilt Inverse, Press the ENTER buton to confirm, present mode will blink on the
display. Use the DOWN and UP buton to select the Yes (Tilt Inversion) or No
(Normal) mode. Once the mode has been selected, press the ENTER buton to setup,
to go back to the functions without any change press the MENU buton again. Hold
and press the MENU buton about one secondo or wait for one minute to exit the
menu mode.
Back Light
Select Back Light, Press the ENTER buton to confirm, present mode will blink on the
display. Use the DOWN and UP buton to select the On (LED On) or Off (LED Off)
mode. Once the mode has been selected, press the ENTER bbutonto setup, to go
back to the functions without any change press the MENU buton again. Hold and
press the MENU buton about one secondo or wait the MENU buton again. Hold and
press the MENU buton about one secondo or wait for one minute to exit the menu
mode.
Function Delay
Select Function Delay, press ENTER buton to confirm, present mode will blink on the
display. Use DOWN and UP buton to select the No Delay or 1S/2S/3S Delay (Wait
for 1/2/3 seconds before these Functions of 12CH are activated/ deactivated) mode.
Once the mode has been selected, press the ENTER buton to setup, to go back to
the functions whitout any 9-change press the MENU buton again. Hold and press the
MENU buton about one secondo or wait for one minute to exit the menu mode.
