www.flash-butrym.pl
Page 9
•
Back Light – Off
•
Function Delay – 3s Delay
Auto Defaults
: Mostly automatic mode, for non professional users, detailed
explanation as followings:
•
Slave Mode – Slave 1
•
Black Out – No
•
Sound State – On
•
Pan Inverse – No
•
Tilt Inverse – No
•
Back Light – On
(Notice: Other settings are NOT changed while choosing Defaults Setting!).
Press the ENTER and the corresponding functions will set to defaults setting, to go
back to the functions without any change press the MENU buton again. Hold and
press the MENU buton about one secondo or wait for one minute to exit the menu
mode.
Reset
Press the MENU buton up to when the Rest is blinking on the display. Pressing
ENTER buton and all channels of the unit will return to their standard position.
5. Home Position Adjust
Offset
Pan Offset
127
Tilt Offset
-127
In the main functions, hold ENTER buton for at least 3 seconds into offset mode, use
DOWN and UP buton up to chose Pan Offset or Tilt Offset, Pressing ENTER buton
and the display will blink. Use Down and UP buton to adjust the home position of the
Pan, Tilt, Once the opposition has been selected, press the ENTER buton to setup,
to go back to the functions without any change press the MENU buton again. Hold
and press the MENU buton about one secondo r wait for one minute to exit the menu
mode.
6. How to Control The Unit
You can operate the unit in two ways:
1. Master/ Slave built-in preprogram function
2. Universal DMX controller
No need to turn the unit off when you change the DMX address, as new DMX
address setting will be effect a tonce. Every time you turn the unit on, it will show
