Safety Precautions
For proper chassis maintenance please follow the guidelines below to avoid any potential damage:
Do not wipe the chassis with solvents such as alcohol, paint thinner, or benzene.
Do not expose the cabinet to any volatile substances.
Do not allow prolonged contact with rubber or plastic.
Apply only gentle pressure to chassis when cleaning.
To clean use soft, lint free cloth to remove dust. A lightly dampened cloth, as described in the screen
maintenance section, may also be used to clean the chassis.
Take care in moving this product as serious injury or death can result from the sudden shifting or falling of this
object.
The vents and openings in the product’s chassis are designed for ventilation. Do not cover, block, or other-
wise obstruct these vents and openings as insufficient ventilation can cause overheating and/or shorten the
life of the product. Do not place the object on a bed, sofa, rug, or other similar surface as this can result in
serious obstruction of ventilation areas. If using in enclosed space make sure to provide proper ventilation to
maintain allowable operating temperature range.
The LCD panel used in this product contains glass and can cause serious injury if broken. If the unit is
dropped or otherwise damaged take care to avoid possible injury by glass shards.
Keep this product away from heat generating sources such as radiators, heaters, stoves, or other heat gener-
ating products.
Avoid prolonged exposure to direct sunlight as this can cause damage to the LCD Panel.
4
© 2011 Flanders Scientific, Inc.
FCC (Federal Communications Commission)
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interface when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accord-
ance with the instruction manual, may cause harmful interference to radio communications.
Warning:
Change or modifications not expressly approved by the manufacturer responsible for compliance
void the user’s authority to operate the equipment.
Back to Table of Contents
