PANEL FAULT
BUZZER:
Press the “SILENCE BUZZER” button to silence the
panel fault buzzer.
For any of the below functions you must be in Access Level
2 mode
ACCESS LEVEL
2 MODE:
Insert the 003 key and turn to the “ON” position.
PANEL ALARM
BUZZER:
Press the “SILENCE BUZZER” button to silence the
panel alarm buzzer.
WARNING
SYSTEM
ACTIVATION:
Press the “EVAC” button for manual activation of the
warning system. Alternatively, if an alarm has been
activated press the “SILENCE/RESOUND ALARM”
button to silence and reactivate the warning system.
FIRE MODE
DISABLING:
To disable zones in fire mode, press “SILENCE/RESOU
zones that have been activated in fire mode.
DISABLING
ZONES:
Press the “DISABLE/ENABLE” button.
Use the “SCROLL” button to cycle through to the
desired zone or sounder output.
Press the “ENTER” button to save, Panel buzzer will
sound for 1s to indicate successful setup.
Press the “SCROLL” button to continue to addition
zones/sounder outputs.
Press the “CANCEL” or “DISABLE/ENABLE” to exit
this menu.
DISABLING
WARNING
SYSTEM:
Press the “DIS/ENABLE WARNING SYSTEM” button.
ENABLEMENT:
Repeat the disablement procedure above.
PANEL RESET:
Press the “RESET” button.
EXIT:
Turn the 003 key to the “OFF” position and remove
key.