FläktGroup Row-DENCO DRC 020, Руководство по эксплуатации

Страница: 19 / 92

Row -DENCO Safety and User Instructions
FläktGroup DC-2014-0106-GB 2019-02/R3 • Subject to modifications 19
4.6.1 Handling refrigerants
According to DIN EN 378 Part 1 the R-134a and R-410A refrigerants belong to A1
group. Refer to the unit identification plate for data and charge volume of a particular
refrigerant.
Observe the usage details in accordance with EC regulation 842/2006.
Features of applicable refrigerant types:
– Non-combustible
– No direct toxic effect
– Colorless and odorless
– Heavier than air
– Contains fluorinated greenhouse gases as defined by the Kyoto protocol
– Ozone-depleting potential OPD: 0
– Greenhouse potential GWP: R-134a: 1300, R-410A: 1980
– Water hazard class WGK 1, with a slight risk to water
•
Wear appropriate clothes when performing jobs with refrigerants and in the proximity
to a refrigeration circuit, e.g.
– Sealing protective goggles
– PVA or leather gloves
– Protective clothes for entire body
– If necessary, an autonomous breathing apparatus
First aid First aid measures directly after or during contact with refrigerants:
•
Ensure your own protection against leaking refrigerant.
•
Under all circumstances - call a doctor or and/an ambulance.
•
Remove clothes contaminated by the refrigerant.
Inhalation Additional measures after inhalation of refrigerants:
•
Take the injured person to a well-ventilated location.
•
Ensure that the injured person is in a stable lateral position.
•
Consumption of food and beverages must be avoided.
•
If the injured person collapses or loses consciousness – perform mouth-to-mouth
respiration.
Skin contact Additional measures after skin contact with refrigerants:
•
Rinse the affected body parts using lukewarm water for at least 15 min.
Eye contact Additional measures after eye contact with refrigerants:
•
Do not rub your eyes.
•
Remove contact lenses if you have any.
•
Rinse your eyes with lots of water.
4.7 Proper use
The compressor-condenser units of the GL line are exclusively provided for connection
to an on-site air handling unit with integrated evaporator for room climate control.
Depending on the load consumption, the individual compressors are switched OFF
and ON with a signal on-site in order to adapt the unit power to the load consumption.
Proper use also includes observance of the operation manual and the inspection and
maintenance conditions stipulated by FläktGroup.
Improper use Any use other than that described above is considered
improper
. The manufacturer/
supplier is not liable for damage arising from improper use. The user alone bears the
risk.