INSTRUCTION MANUAL
Electrical winches LM500+/300S+
Réf : 1813000208
Page :
10/20
Version : 39/21
Check the operation of the limit switches of the
winch.
For your safety, use only FIXATOR cables.
Ensure that the cable above the hoist (taut) does not
touch surfaces or angles.
Ensure that the outgoing winch cable (slack) is free.
Do not let the loaded rope become slack if the load
is not stable, resting on a strong enough support.
2.2
Diagrams and safety explanations
Installation and use operations must be
performed by personnel specially trained by the
manufacturer or its dealers, duly authorised by their
employer.
The maximum capacity of the hoist (WLL) should
be the basis for calculations of anchor strength.
2.2.1
Main dimensions
(depends according versions)
Document téléchargé par [email protected] - 2022-03-11 15:38:39
