INSTRUCTION MANUAL
Electrical winches LM500+/300S+
Réf : 1813000208
Page :
3/20
Version : 39/21
1
Generalities
This notice covers the use of winches LM type 461
(and its versions listed in §1.4).
1.1
Description of the machine
The LM is a portable electric reeving hoist for
unlimited hoisting cable movement (check
instructions on the hoist plate: "Type 461").
The standard equipment includes:
- the unit with its carrying handle and the safety
hook; engine with main brake and protected by
thermal probe
- 2 travel end stopper
- 1 pendant control station (2,5 m) double insulation
IP 65 with 3 button: ascent, descent and emergency
stop (extension: 200 m maximum)
- male/female plug and cable power (0.50m)
- 1 manual
The LM winch cannot be used to lift or move
people or dangerous goods.
1.2
General description.
Diagram of typical installation:
This winch is designed for the lifting and traction of
loads. It is intended for professionals involved for
work, such as in an elevator shaft or on building
facades. The winch uses one steel cable (hoisting
cable).
The drive system consists of a pulley whose throat
has a special profile, and in which the cable is tight
under the effect of the load by two articulated
rollers. This allows an unlimited run of the hoisting
cable.
This technical design ensures a great security
provided you follow the instructions given in this
manual.
Each device carries labels information and
instructions. Constantly make sure that all these
labels are in place and legible.
The LM winch must be used exclusively with
special lifting cable, to fully ensure the safety and
efficiency.
Before its expedition by Fixator, each hoist is tested
to 110% of its capacity.
Additional kits exist:
ref : 540155
ref : 462053
ref 010046 (230V versions only)
ref 461057/58
ref : 461021
Document téléchargé par [email protected] - 2022-03-11 15:38:39
