Fitness Equipment MLD-M6, Руководство по эксплуатации продукта

Страница: 20 / 30

19
Installation steps
Figure 9
1. Install 2 Φ50xΦ26 sleeves (#107) and 2Φ25 handle sleeves (#37) on right/left VKR arms
(#95/#96) respectively;
2. Secure the right/left VKR arm (95#/96#) to the front column (#92) with 1 hex head bolt M12x70
(#125), 2 flat washers
Φ12 (#121) and 1 locknut M12 (#112);
3. Install the 2 handle Φ25x120 (#37) to one end of the Φ25 handle pipe (#91) without the weld
nut.
4. Install Φ25 handle pipe (#91) on right/left VKR arm (#95)/(#96) with 2 hex head bolts M10x25
(#65) and 4 curved pads Φ10 (#85).
5. Install 2 VKR arm pads (#98) with 4 hex head bolts M8x65 (#110) and 4 curved pads Φ8
(#113).
6. Install the VKR arm connector (#102) on the right/left VKR arm (#95/#96) with four bevel head
hex bolts M8x12 (#105) and four flat pads
Φ8 (#55).
7. Insert the ring pins Φ10x70 (#106) into the front column #92).