Fitness Equipment MLD-M6, Руководство по эксплуатации продукта

Страница: 14 / 30

13
5. Attach the winged rack screw (#16) to the U-frame of the front column (#4) square tube with 1
hex head bolt M8x40 (#63), 2 flat pad
Φ8 (#55) and 1 locknut M8 (#74); screw the winged rack
fixing knob (#43) to the winged rack screw (#16).
6. Cover a 25X50 square pipe plug (#46) at the end of the winged rack (#7).
7. Attach the Φ19 liner to the top beam (#8) as shown, and mount the winged rack (#7) to the top
beam (#8) via the winged rack fixing axle (#15); then lock 2 hex head bolts M10x25 (#65) and 2
large flat pads
Φ10 (#59) to both ends of the winged rack fixing axle (#15).
Installation steps
Figure 4
1. Installed on the main base (#1) with 3 hex head bolts M10x100 (#71), 6 flat pad Φ10 (#56) and
3 locknut M10 (#75), with bolts temporarily left untightened.
2. Lock the bar frame (#123) to the single rod bend tube (#122) with 2 hex head bolts M10x55