Fisheye FIX AQUAVOLT 5000Mini, Руководство по эксплуатации продукта

Страница: 19 / 24

- 19 -
Charging Battery
1. Take the battery out of the light.
2. Insert the plug of the battery charger in the power outlet. Make sure that the LED of the charger
turns on in green.
3. Plug in the charge connector of the battery.
4. When charge is started, the LED of the battery charger turns on in red.
5. The LED of the charger turns on in green when charge is completed. (Charging time is up to
approx. 2 hours)
6. Remove the charge plug from the battery.
DANGER
-Do not charge on paper, carpet or anything potentially flammable as battery and
charger may become hot during charging.
-Do not charge with coiled cables as heat build-up may result in fire.
-Do not handle charging work with wet hands or charge under wet circumstances to
avoid electric shock.
-Do not charge batteries that have been flooded, or are suspected of having water
intrusion.
-Charger is multi-volt compatible (100–240V), but using at a resort or on a cruise ship
with in-house power generation may cause highly unstable voltage output and result in
damage to the charger. It is recommended to use a converter with a built-in safety
circuit.
-Do not charge in temperatures above 30°C (86°F) or in direct sunlight.
-Charge in a stable position to avoid the plug being disconnected from vibration, impact
shock or dropping. In case of the plug being disconnected during charging, do not
charge again while the battery is hot. Cool it to room temperature before charging, as
the temperature sensor may not allow it to take a full charge.
-Do not unplug the AC adapter from the power outlet while the charging plug is still
inserted. Doing so may cause over discharge and may not allow the battery to take a
subsequent charge.
WARNING
CAUTION