- 18 -
Installation of YS Adapter
Installation example of 2-Way handgrip
1. Detach the YS adapter by a screw driver.
2. Attach the Ball adapter with an adapter holder. Tighten a screw clockwise and fix.
Battery Loading Procedure
1. Hold the front body firmly and remove the rear body by rotating anti-clockwise.
2. Load the battery to the rear body as per the below illustration.
3. Hold the body case firmly and attach the Light Head by rotating clockwise.
*Battery removal is the opposite procedure.
Horizontal
Vertical
How to Use
WARNING
Remote Control Connector
A screw hole for adapter fixation
Do not work with wet hands or under wet conditions due to the risk of
electric shock or damage.
-Make sure that there is no dust, sand etc. on the O-ring, O-ring groove or O-ring contact
surface and grease the O-ring before closing the rear body.
-Take care not to drop when removing the battery. It may cause not only damage to the
battery but also injury.
If direction is reverse, the battery
cannot install.
Содержание FIX AQUAVOLT 5000Mini
Страница 1: ...AQUAVOLT 5000Mini 取扱説明書 PRODUCT MANUAL ...