34
Section 9 Precautions
Follow the precautions listed below for accurate results and operation of the
analyzer.
1. The protection provided by the equipment may be impaired if used in a
manner not defined in this user guide.
2. Connect to a power connection which contains a working grounding plug.
3. Wear gloves to avoid contact with potentially hazardous biological samples
during processing strips, or analyzer components.
4. Keep the unit away from direct sunlight and magnetic fields when testing.
5. Never place anything within 7 cm of the front of the unit. This will avoid
interference with the Strip Holder.
6. Keep the unit clean. Wipe it frequently with a soft, clean and dry cloth.
Use fresh water when needed.
7. Do not clean the unit with substances such as gasoline; paint thinner,
benzene compounds or other organic solvents. This will avoid any
damage to the Strip Holder, White Calibration Circle, or other components.
8. Do not wash the LCD with water. Lightly wipe the LCD with a clean, soft
and dry rag.
9. The Strip Holder must be kept clean. Wipe the Strip Holder using fresh
water daily. Refer to Daily Cleaning in Section 8.
10. Follow all local regulations when disposing the unit or its accessories.
11. Do not use the unit or the strips outside of the operating temperature
ranges listed below.
Analyzer: 0-40ºC (32-104ºF)
Strips: 15-30ºC (59-86ºF)
