background image

Fisherbrand

 18L low temp incubator         1-1

1

Safety Information

Basic operating precautions

These operating instructions describe the Fisherbrand 18L low temp incubator.

The Fisherbrand 18L low temp incubator has been manufactured to the latest state of the art 
and been tested thoroughly for flawless functioning prior to shipping. However, the device 
may present potential hazards, particularly if it is operated by inadequately trained personnel 
or if it is not used in accordance with the intended purpose. Therefore, the Fisherbrand 18L 
low temp incubator following must be observed for the sake of accident prevention:

• The Fisherbrand 18L low temp incubator is only to be used by trained and authorized 

personnel.

• The present operating instructions, applicable safety data sheets, plant hygiene guidelines 

and the corresponding technical rules issued by the operator shall be used to create written 
procedures targeted at personnel working with the subject matter device, detailing:

• the disinfection measures to be employed for the device and the accessories used with 

it,

• not to be used in a damp atmosphere,

• the protective measures which are to be taken when processing certain agents,

• action to be taken in case of accidents.

• Maintenance work on the device is only to be carried out by trained and authorized 

specialists. The device is not to be repaired. It will be repaired during the warranty period 
and then has to be disposed of by the customer; he having to purchase a new one should it 
still be required. 

• The contents of these operating instructions are subject to change at any time without 

further notice.

• Concerning translations into foreign languages, the English version of these operating 

instructions is binding.

• Keep these operating instructions close to the device so that safety instructions and 

important information are always accessible.

• Should you encounter problems that are not detailed adequately in these operating 

instructions, please contact Fisher Scientific immediately for your own safety.

Содержание 50152744





































Отзывы: