background image

D102237X012

Fisher Controls International, Inc. 1996; All Rights Reserved

FIELDVUE, ValveLink, Fisher, Fisher-Rosemount, and Managing The Process Better are
marks owned by Fisher Controls International, Inc. or Fisher-Rosemount Systems, Inc.
HART is a trademark of the HART Communications Foundation
All other marks are the property of their respective owners.
This product may be covered by one or more of the following patents (5,434,774 and
5,451,923 ) or under pending patents.

Type 2530H1 HART

 

Interchange Multiplexer

Contents

Introduction

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Scope of Manual

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Description

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Specifications

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installation

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Mounting

4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Multiplexer Mounting

4

. . . . . . . . . . . . . . . . . . . . . . . . 

HART

 Filter Mounting

4

. . . . . . . . . . . . . . . . . . . . . . 

Junction Box Mounting

6

. . . . . . . . . . . . . . . . . . . . . . 

Connecting Multiplexer Power

7

. . . . . . . . . . . . . . . . . 

Connecting Multiple HART Interchange

Multiplexers

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Connecting Multiplexers to the

RS232-to-RS485 Converter

7

. . . . . . . . . . . . . . . . . 

Converter DIP Switches

7

. . . . . . . . . . . . . . . . . . . . . . 

Setting the Converter RS485 Termination

and Biasing

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Setting the Converter Baud Rate

9

. . . . . . . . . . . . . . 

Multiplexer DIP Switches

9

. . . . . . . . . . . . . . . . . . . . . . 

Setting the Multiplexer RS485 Addresses

9

. . . . . . 

Setting the Multiplexer RS485 Baud Rate

9

. . . . . . 

Connecting Field Devices to the Multiplexer

10

. . . 

Connecting HART Filters Directly to the

Multiplexer

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Connecting HART Filters to the Multiplexer

Using the Type HJ200 Junction Box

11

. . . . . . . . 

Connecting Field Devices Directly to the

 Multiplexer (without HART Filters)

11

. . . . . . . . . 

Connecting Field Devices to the Multiplexer

Using the Type HJ200 Junction Box
(without HART Filters)

12

. . . . . . . . . . . . . . . . . . 

Connecting a HART Communicator Using

the Type HJ200 Junction Box

12

. . . . . . . . . . . . 

System Startup

12

. . . . . . . . . . . . . . . . . . . . . . . . . . 

Verifying Connections

12

. . . . . . . . . . . . . . . . . . . . . . 

Verifying the Network Baud Rate

13

. . . . . . . . . . . . . 

Verifying the HART Interchange

Multiplexer Addresses

13

. . . . . . . . . . . . . . . . . . . . 

Verifying the RS485 Network

13

. . . . . . . . . . . . . . . . 

Reading the Converter LED Indicators

13

. . . . . . . . 

Reading the Multiplexer LED Indicators

13

. . . . . . . 

Service

14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Figure 1. Type 2530H1 HAR

T Interchange Multiplexer

W6486/IL

Introduction

Scope of Manual

This instruction manual includes installation and main-
tenance information for the Type 2530H1 HART inter-
change multiplexer. Refer to separate manuals for
additional information on other FIELDVUE

 products

used with the multiplexer such as the Type DT4000
digital transducer, DVC5000 Series digital valve con-
trollers, HF200 Series HART filters, and the
ValveLink

 Series VL2030 software.

Only personnel qualified through training or experience
should install, operate, and maintain the Type 2530H1
HART interchange multiplexer. If there are any ques-
tions concerning these instructions contact your Fisher
Controls sales office or sales representative before
proceeding.

Description

The Type 2530H1 HART interchange multiplexer is a
HART-based multiplexer that links installed HART-
based field devices to a centralized personal computer
(PC). When used in conjunction with the ValveLink
Type VL2030 software, the multiplexer provides the

Instruction Manual

Form 5407

February 1996

Type 2530H1

Содержание HART 2530H1















Отзывы: