Fisher Scientific Isotemp 800 Series, Руководство пользователя

Страница: 6 / 36

6
Preparing the Oven
To prepare the oven for operation, perform the following
procedures:
1. Install the shelf(ves).
2. Make certain all packing material has been
removed from oven chamber.
3. Connect the line cord to an appropriate electri-
cal outlet.
4. The oven is now ready for operation. No prelimi-
nary adjustments or calibrations are required.
Depending on the customer application and cus-
tomer laboratory procedures an initial calibration
may be done at this point.
Power Switch
The 800 Series ovens feature a front panel mounted
power switch which is a Switch combination power switch
and circuit breaker, eliminating the need for separate
fusing. The circuit breaker will interrupt power in the event
of an oven heater malfunction. Press the I (upper) half of
the rocker-type power switch to the in position to turn the
oven on. Press the 0 (lower) half to the in position to turn
off oven power. To reset the breaker, first place the switch
to the off position, then return it to the on position.
I
NSTALLATION
Caution
See data plate on oven for voltage,
current and line frequency specifica-
tions. Check that the power require-
ments of the oven will not overload the
circuit to which it will be connected.