Fisher Scientific Isotemp 800 Series, Руководство пользователя

Страница: 18 / 36

Programming Step 2:
8. Press the Menu Key again. The displays will
indicate the next program step for editing (“2
Step”). Press the Menu Key to enter the step.
9. Use the Up or Down Arrow Key to select the
step type for step #2. Press the Menu Key
when the displays indicate “SP StyP”. This will
enable the second ramp step.
10. Adjust the set point to 325°C using the Up Arrow
Key. When the displays indicate the new set
point, press the Menu Key to save it.
11. The display will next prompt for the ramp rate.
Use the Up or Down Arrow Key to change the
Actual Display to 4.0 (4°/min). Press the Menu
Key to enter the ramp rate.
Programming Step 3:
12. Press the Menu Key to continue programming.
Press the Menu Key again to initiate program-
ming the third step (“3 StEP”)
13. Use Up or Down Arrow Key to change the dis-
play to the Soak operation (“SoAh StyP”).
Press the Menu Key to select a constant tem-
perature soak period.
14. Use the Up or Down Arrow Key to adjust the
Actual Display to indicate the desired soak
hours, namely 2. (“2 HOUrS”). Press the Menu
Key to enter the soak hours.
15. Use the Up or Down Arrow Key to set the delay
minutes (“0 Min”). Press the Menu Key to enter
the minutes.
16. Use the Up or Down Arrow Key to set the
desired soak seconds (“0 SEC”). Press the
Menu Key to enter the seconds.
17. Press the Menu Key to continue programming.
(“no rtn”).
18
O
PERATION