Y21
89pr
-0729
10
Troubleshooting
Î
service.fi sher-price.com
ASSEMBLY
Note:
Make sure the fasteners on the long seat belt are facing
the fasteners on the short seat belts.
• Insert the ends of the long seat belt up through the slots in
the centre of the seat.
• Fit the folded tabs on the belt up through the slots in the
centre of the seat to keep the long seat belt in place. Make
sure the folded tabs are on visible on the top side of
the seat.
Folded Tab
Fastener Side
Fastener Side
Long Seat Belt
• Fit the rear fenders under the tabs the sides of the seat,
as shown.
Rear Fenders
• Insert two #8 x 1,9 cm screws into the
upper
hole in each
side of the seat and tighten.
Note: Do not insert screws into the lower holes
on the seat
in this step. These screws will be assembled in this location in
step 24.
DO NOT insert screws here.
x2
• Insert a #8 x 1,3 cm screw into a hole in the front of the
seat back.
x2
x
