Lit. No. 72446, Rev. 05
76
November 15, 2020
OPERATING YOUR SNOWPLOW
Clearing Parking Lots
1.
Clear areas in front of buildings first. With the
blade raised, drive up to the building. Drop the
blade and back drag the snow away from the
building. When snow is clear of the buildings,
turn the vehicle around and push snow away
from the buildings toward the outer edges of
the lot.
2. Plow a single path down the center in the
lengthwise direction.
3. With the blade in the scoop, angle, or dogleg
position, plow successive strips lengthwise
until the area is cleared and snow is "stacked"
around the outer edges.
4. If snow is too deep to clear in the above
manner, clear main traffic lanes as much as
possible.
PARKING WITH SNOWPLOW
ATTACHED
Whenever you park your vehicle, completely lower
the blade to the ground.
TOWING DISABLED OR STUCK
VEHICLE
Do not use any snowplow components as an
attachment point when retrieving, towing, or
winching a disabled or stuck vehicle.
WARNING
Lower the blade when the vehicle is
parked. Keep 8' clear of the blade.
Temperature changes could change
hydraulic pressure, causing the blade to
drop unexpectedly or damaging hydraulic
components. Failure to do this could
result in serious personal injury.
