Lit. No. 72446, Rev. 05
70
November 15, 2020
OPERATING YOUR SNOWPLOW
ANGLE RAM ADJUSTMENT –
EZ-V
®
BLADES
The EZ‑V V‑plow has adjustable angle rams with
two possible mounting positions at the base end
of each ram, nearest the vehicle. This feature
provides a means for making an adjustment in
available ground clearance for when the snowplow
is fully raised and in full angled or retracted (vee)
positions.
The angle rams are installed from the factory
in the inner holes (Position A). If additional
ground clearance is desired, reposition the
rams to Position B, being sure to use the same
corresponding hole for attaching each ram.
Failure to make the adjustment or failure to use
the same corresponding holes for attaching the
rams could result in poor performance or damage.
Position A
Position B
