manualshive.com logo in svg

Fisher Engineering SNOWPLOW, Руководство пользователя

Поделиться
Скачать
Fisher Engineering SNOWPLOW Скачать руководство пользователя страница 61

Lit. No. 72446, Rev. 05 

62 

November 15, 2020

1. 

Raise the blade one foot off the road surface, 

turn the control OFF. From in front of the 

blade, place jack stands under the cutting 

edge.

2.  Turn the control ON and lower the blade onto 

the jack stands. Turn the control and vehicle 

ignition OFF.

3.  Remove the linchpin and slide the anti‑wear 

shoe down and out of the shoe holder.

 WARNING

Blade can drop unexpectedly. Place blade 

on jack stands. Failure to do so could 

result in serious personal injury.

OPERATING YOUR SNOWPLOW

4.  Remove one or more spacers from the shoe 

stem and reinstall the shoe into the shoe 

holder.

5.  Reinstall the linchpin.

6.  Turn the control and vehicle ignition ON. Raise 

the blade slightly from the jack stands. Turn 

the control OFF and remove the jack stands.

7.  Stand 8 feet clear of the blade when checking 

the height adjustment of the cutting edge to 

the road surface.

8. 

DO NOT

 store unused spacers on top of the 

shoe holder.

Содержание SNOWPLOW



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды