background image

44

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Black or grey 
marks on clothes

Correct amount of detergent.

Ensure the correct dose of detergent is 
used for the load size and soil level. Refer to 
‘Detergent and softener’.

Washer needs to be cleaned.

Empty the machine and complete a 

DRUM

 

CLEAN

 cycle. Refer to ‘Cleaning the 

drum and the door’.

Tangling

Items not sorted correctly.

Separate larger items from smaller items.

Washer loaded incorrectly.

Load items loosely and individually into the 
washer (ie not folded).

Incorrect cycle for load 
type selected.

Use the 

EASY IRON

 

or 

STEAM REFRESH

 cycle 

for items that crease easily

Overloaded in terms of its capacity 
or the cycle selected.

Refer to ‘Wash cycles’ for recommended 
maximum load size.

Delicate items.

Wash pantyhose, bras and any 
other delicate items prone to tangling in a 
mesh laundry bag.

Washer Smells

Not using enough detergent for the 
soil level in your loads.

Run a 

DRUM CLEAN

 

cycle.

Buy a better quality detergent or use a 
higher dose.

Different detergents have different cleaning 
chemicals, consider alternating detergents 
to help remove odour.

Wet patches 
on clothes

Clothes are slightly damp from 
the steam.

It is normal for items to be damp after using 
the 

STEAM REFRESH

, this helps remove the 

wrinkles. Remove the item from the washer 
immediately at the end of the cycle and 
hang up to dry.

Inside surfaces of the washer wet.

If there is residual water on internal surfaces 
of the washer (i,e inside the door, door 
gasket, drum) wipe this with a soft towel 
before completing a 

STEAM REFRESH

 cycle.

 

Contact a Fisher & Paykel trained and supported service technician if a problem persists.

Содержание WH1060P4





















































Отзывы: