37
BEFORE YOU CALL FOR SERVICE
PROBLEM
DISPLAYED AS
WHAT TO DO
The washer has
too many suds
Washer will stop and flash
while waiting for suds
to dissipate. The washer will not beep during this time.
When the suds have dissipated the washer will automatically
restart. If a suds event has occurred during a cycle the washer
will also display this warning at the end of the cycle, to alert you
that this has occurred. This may help to explain any reduction
in performance.
Check you are using a detergent suitable for front loaders.
Check you are not overdosing the detergent.
Check the standpipe height for the drain is a minimum
of 600mm.
Door is locked
The temperature in the drum is over 60°C therefore it is not safe
to open the door. Wait until the temperature drops below 60°C.
Check the water level in the drum. If the level is above the
bottom of the door seal, the door cannot be opened. Use the
ADD A GARMENT
button if you wish to add or remove items.
If the drum is still moving, wait for it to stop before attempting
to open the door.
Door is open
Close the door fully and press
.
Try opening and closing the door again.
Reposition the load, make sure the load is correctly in the
drum and that protruding items are not stopping the door
from closing.
