manualshive.com logo in svg

Fisher & Paykel Titan AeroTech OD302-B, Руководство по обслуживанию, Страница: 48 / 64

Поделиться
Скачать
Fisher & Paykel Titan AeroTech OD302-B Скачать руководство пользователя страница 48

Service Manual 599337A: 302B Series Titan Oven 

July 2006 

 

 48   

 

L.C.D Lenses: 

Removal 

1.  Follow the procedure for removal of L.C.D modules above to step 4. 

2.  Remove the damaged lens and clean the old adhesive strip area.  

3.  Remove the adhesive tape backing strip from the replacement lens.  

4.  Remove the protective strip from the replacement L.C.D lens and attach it ensuring it 

is fitted squarely. 

Note:

 Take care not to leave fingerprints or visible marks on any lens surface. 

Reassembly 

 

Refit in reverse manner.  

Note:  

Ensure the wiring harness wires are clear of possible crush points when 

reassembling. 

 

Follow the reassembly procedure.  (refer to Section 7.5)  

 

7.8  Clock Module or Buttons 

Location:  

Control Panel

 

 

Removal

 

1.  Follow the general servicing instructions for components around the control panel 

area.  (refer to Section 7.2)  

2.  Remove the temperature/oven mode knobs and the clock twist button.  

3.  Disconnect the earth wire and remove the mounting panel.  

4.  Disconnect the wiring harness and transfer to the replacement clock module or 

replace the button assembly.

 

5.  If replacing the clock module, remove the protective strip from screen.  

Note:

 Take care not to leave fingerprints or visible marks on any lens surface. 

Reassembly

 

 

Refit in reverse manner.  

Note:

  Ensure the wiring harness wires are clear of possible crush points when 

reassembling. 

 

Follow reassembly procedure.  (refer to Section 7.5)  

Содержание Titan AeroTech OD302-B

































































Отзывы:

Нет отзывов