manualshive.com logo in svg

Fisher & Paykel Titan AeroTech OD302-B, Руководство по обслуживанию, Страница: 47 / 64

Поделиться
Скачать
Fisher & Paykel Titan AeroTech OD302-B Скачать руководство пользователя страница 47

Service Manual 599337A: 302B Series Titan Oven 

July 2006 

 

 47   

 

7.6  Function and Temperature Switch Modules 

Location:  

Control Panel  

Removal 

1.  Follow the general servicing instructions for components around the control panel 

area.  (refer to Section 7.2)  

2.  Remove the temperature/oven mode knobs and the clock twist button.  

 Note:

  To best work on the control panel turn it face down and place blocks of 

polystyrene under the ends to elevate it off the working surface. 

 

3. Disconnect the earth wire and remove the 

mounting panel. 

4.  Remove the retaining nut and washer from the 

faulty module.  

5.  Disconnect the wiring harness and transfer to 

the replacement module.  

6.  Remove the plastic mounting bracket from the 

faulty module and transfer it to the replacement 
module.  

 Reassembly

 

 

Refit in reverse manner.  

 Note:

  Ensure the wiring harness wires are clear of possible crush points during 

reassembly. 

 

Follow the reassembly procedure.  (refer to Section 7.5)  

 

7.7  Function and Temperature L.C.D. Modules and Lenses  

Location:  

Control Panel

 

 

L.C.D Modules:

 

Removal

  

1.  Follow the general servicing instructions for components around the control panel 

area.  (refer to Section 7.2) 

2.  Remove the temperature/oven mode knobs and the clock twist button.   

3.  Disconnect the earth wire and remove the mounting panel.  

4.  Unclip the faulty module from the retaining lens and lift out.  

5.  Disconnect the wiring harness and transfer it to the replacement module.  

Note:

  Take care not to leave fingerprints or visible marks on any lens surface. 

Reassembly

 

1.  Remove the protective strip from the L.C.D module screen.  

2.  Refit in reverse manner.  

Note:

  Ensure the wiring harness wires are clear of possible crush points when 

reassembling. 

 

Follow the reassembly procedure.  (refer to Section 7.5) 

 

 

 

 

Mounting Bracket

 

Figure 7.6 

Содержание Titan AeroTech OD302-B

































































Отзывы:

Нет отзывов