Fisher & Paykel DE60F60NW1, Инструкция по установке и руководство пользователя

Страница: 11 / 20

9
Selecting a programme and operating your machine
Auxiliary function
Buzzer cancel
Your machine will send out a buzzer warning when the programme comes to an end. If you
do not want to hear this warning, you need to press the
BUzzeR CANCel
button. The relevant
LED will light up when this button is pressed and an audio warning will not be given when the
programme comes to an end.
Filter cleaning
A warning LED will light up to remind you to clean the filter after the programme finishes.
If the filter cleaning warning LED lights up continuously, please refer to the ‘Troubleshooting’
section (page 14).
Water tank
A warning LED will light up at the end of the programme or when the tank is full with water.
The machine stops operating when this warning LED lights up. To restart the machine, please
drain the water in the water tank. Press
StARt/PAUSe/CANCel
button to start the programme
after you have emptied the water tank. The warning LED goes off and the programme resumes
operating.
Starting the programme
Press the
StARt/PAUSe/CANCel
button to start the programme. The
StARt/PAUSe/CANCel
button
will light up to indicate that the programme has started.
Progress of programme
Progress of a running programme is shown through the programme follow-up indicator.
At the beginning of every programme step, the relevant indicator LED will light up and light of
the completed step will turn off.
Drying
Drying level will be illuminated during the whole drying process until the drying degree reaches
ReAdy tO IRON
.
Ready to Iron
Starts to illuminate when the drying degree reaches the
ReAdy tO IRON
step and remains
illuminated until the next step.
Ready to Wear
Starts to illuminate when the drying degree reaches the
ReAdy tO WeAR
step and remains
illuminated until the next step.
End/Wrinkle Guard
Illuminates when the programme comes to an end and the anti-creasing function is activated.
ƒ
If more than one LED lights up or flashes concurrently, it means there is a malfunction or a
failure. Please refer to the ‘Troubleshooting’ section (page 14).