Fisher & Paykel DE60F60NW1, Инструкция по установке и руководство пользователя

Страница: 16 / 20

14
Troubleshooting
Problem Cause Explanation / Suggestion
Drying process
takes too long. The filter cover and filter drawer
may need cleaning. Check the filter cover and filter drawer
are free of lint. Clean if required.
Laundry is still wet
at the end of the
drying cycle. The filter cover and filter drawer
may need cleaning. Check the filter cover and filter drawer
are free of lint. Clean if required.
The machine may be overloaded. Check that the load size does not
exceed the maximum capacity for the
product.
Machine does not
switch on, or the
programme does
not start. The product may not have been
plugged in. Make sure the power cord is plugged
in and machine is switched on.
The loading door may be ajar. Ensure that the loading door is
properly closed.
Programme may not have been set,
or the
StARt/PAUSe/CANCel
button
may not have been pressed.
Check the programme has been
selected and that it is not in
PAUSe
mode.
Childproof lock may have been
activated. Deactivate the childproof lock.
Programme has
been interrupted
without any cause. The loading door may be ajar Ensure the loading door is properly
closed.
The power supply may have been
cut off to the machine. Check the power cord is plugged in.
Press
StARt/PAUSe/CANCel
button to
start the programme.
Laundry has
shrunk, become
felted, or
deteriorated. A programme not suitable for
the type of laundry may have
been used. Dry only the laundry which is suitable
for drying in your machine after
checking the care label on your
clothes.
Select a programme with a suitable
low temperature for the laundry type.
Drum lighting does
not come on. The machine may not have been
turned on using the
ON/OFF
button.
Ensure that the machine is on.
The bulb may have blown. Call your nearest Fisher & Paykel
Authorised Repairer to replace
the bulb.
tANk FUll
warning
LED is on.
WRINkle GUARd
programme may be
running.
Water Tank may be full.
Drain the water in the water tank.
Press
StARt/PAUSe/CANCel
to resume
programme.
CleAN FIlteR
LED
is on.
The filter may need cleaning. Check the filter cover is free of lint.
Clean if required.