OPERATING INSTRUCTIONS
Printed in U.S.A.
Read Drying Procedures in your Owner's Guide.
It explains these operating steps in detail.
1. Prepare items for drying.
Operating Steps
P/N 134066300 (0107)
Versión en español
Si desea obtener una copia en español de estas
Instrucciones de Funcionamiento, sírvase escribir a la
dirección que se incluye a continuación.
Solicite la P/N 131972200.
Spanish Owner's Guides
Electrolux Home Products
P. O. Box 212378
Augusta, Georgia 30917
The
REGULAR-HIGH HEAT, PERM PRESS-MEDIUM
HEAT
, and
KNITS/DELICATES-LOW HEAT
temperature
settings may be used with any cycle setting. The
AIR
FLUFF-NO HEAT
setting can be used only in the Timed
Dry cycle.
AIR FLUFF-NO HEAT
setting tumbles the load without
heat. Use Air Fluff to freshen clothing, pillows or
blankets, or to dust draperies.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to tumble
during the cool down period. This reduces wrinkling and
makes items easier to handle during unloading.
Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.
2. Check that lint screen is clean and in place.
3. Load the dryer.
If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
5. Set Dry Temperature control. Select PRESS
SAVER if desired.
6. Turn cycle selector clockwise to desired
setting.
7. Start dryer.
Push the Start button and hold for 1-
2 seconds, or turn the Turn to Start control
clockwise to ON. Hold for 1-2 seconds and release.
8. A signal will sound toward the end of the cool
down period when the End of Cycle chime is
turned on.
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care
labels.
To avoid fire hazard, do not use heat
to dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials.
Use Air Fluff-No Heat setting only.
Before Operating Your Dryer
Read your dryer Owner's Guide.
It has important
safety and warranty information. It also has many
suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer owner's guide
before operating this appliance.
PRESS SAVER
COLORS/
WHITES/
COLORS
/
PRESS
SAVER
WHITES
/
PRESS
SAVER
ON
OFF
END OF CYCLE
SIGNAL
