Fisher & Paykel CLEANSMART WL8O60P Скачать руководство пользователя страница 41

Страница: 41 / 52

BEFORE YOU CALL FOR SERVICE

PROBLEM

DISPLAYED AS

WHAT TO DO

The washer is
out of balance.

Wash load is out of balance. Ensure the washer is stationary.
Manually redistribute the load.

Check the washer is level, refer to ‘Installation Instructions -
Levelling instructions’.

The washer has
too many suds.

The washer has a suds build-up (too much detergent may have
been used for the amount of soil in the load). Wait for suds to
dissolve (about 20 min). Rinse clothes using a deep rinse.

Check the standpipe height does not exceed 1200 mm.

If using the

DUAL WASH

option, reduce the amount of detergent

placed in the detergent dispenser.

If the symptom persists, call your Fisher & Paykel dealer or
Authorised Repairer.

The lid can’t
lock or the lid
is open.

Make sure the lid is closed.

Touch

. Refer to ‘Washer safety features - Lid lock’.

If the symptom persists call your Fisher & Paykel dealer or
Authorised Repairer.

The washer is
overloaded.

The washer is overloaded and cannot agitate. Ensure the
washer is stationary. Remove items until the remaining ones can
move freely.

Check that the washer is not siphoning

refer to ‘Installation

Instructions - Draining’.

The washer
has stopped.

The power was cut to the washer. The washer will restart
automatically. No action is required.

The washer
has stopped.

The

was touched and the washer was inactive for 3

minutes. The washer will automatically drain to a safe level. Touch
any button to stop auto draining then touch

to resume the

wash cycle.

The washer is on
but the display
is blank.

The washer was unattended without starting a cycle for a period
of time. Touch

to activate.

Содержание CLEANSMART WL8O60P





















































Результаты поиска

Содержание CLEANSMART WL8O60P

Отзывы:

Похожие инструкции для CLEANSMART WL8O60P

Бренды по названию

Популярные бренды

Fisher & Paykel CLEANSMART WL8O60P, Руководство по установке

Результаты поиска

Содержание CLEANSMART WL8O60P

Отзывы:

Похожие инструкции для CLEANSMART WL8O60P

Бренды по названию

Популярные бренды