Fisher & Paykel CLEANSMART WL8O60P, Руководство по установке

Страница: 45 / 52

45
TROUBLESHOOTING
Wash problems
PROBLEM POSSIBLE CAUSES WHAT TO DO
Wash cycle time
longer than usual If water pressure is low, cycle
time will increase due to longer
fill times. Ensure that inlet hose filters are
not blocked.
The out of balance automatic
recovery setting may be selected
(ie Automatic Recovery is ON). Refer to ‘Changing pre-set options’.
Wash cycle time is approximate
and may be affected by a
number of factors. Refer to ‘Wash cycles’.
Small amount of
water in bowl at end
of cycle
A small amount of water may
discharge from the fill nozzle
after wash. This is normal.
Liquid remaining
in Fabric Softener
and/or Wash Boost
dispenser at end
of cycle
SOFTENER
option may not have
been selected.
Check next time if you wish for softener to
be dispensed that the
SOFTENER
option
is selected.
After flushing of dispensers,
a small amount of water may
remain in the dispenser at the
end of the cycle. This is normal.
Dispensers may be blocked. Try cleaning your Fabric Softener and/
or Wash Boost dispenser to remove any
blockages, refer to ‘Caring for your washer’.
Creasing Overloading of the washer. Try reducing load size.
Inappropriate cycle selection. Choose EASY IRON or DELICATE cycle
as these cycles have been designed to
minimise creasing.
Spin speed too high. Try selecting a lower spin speed.
Wash temperature too high
for items. Try selecting a lower wash temperature.
Other. Sort your load so that items of similar
weight are washed together.
Do not leave wet clothes to sit in the
washer or laundry basket.