Fisher & Paykel CLEANSMART WL8O60P Скачать руководство пользователя страница 5

Страница: 5 / 52

SAFETY AND WARNINGS

MODEL CODE

MAX CAPACITY* (KG)

WL8060P

*Capacity refers to the maximum dry weight of items the washer can wash at any one
time.

Do not overload your washing machine beyond its rated capacity.

Do not wash an electric blanket in your washer unless the care label specifically states

it is safe to do so.

Do not wash curtains in this washer, as sunlight makes them brittle and they may

disintegrate during washing.

The only user-removable parts of the washer are the inlet hose(s) and the dispenser

funnels (tops). No other parts are designed to be removed by anyone other than a

Fisher & Paykel trained and supported service technician.

Installation

For guidance on how to install your product, please refer to installation instructions

contained in this document.

Water supply requirements:

Inlet water pressure: Max. 1MPa (145psi), Min. 34kPa (5psi)

Inlet water flow rate: Min. 8 litres/minute

A pressure-reducing valve must be installed if pressure is higher than 1MPa.

For optimum wash performance check the supply pressure is within the

recommended range.

New hose sets provided with the washer should be used to connect the washer to the

water mains. Old hose sets should not be re-used.

We recommend the inlet hose(s) are changed every 5 years. WARNING: Failure to do so

may result in a flood and damage to property.

The hot water temperature should not exceed 65°C and the cold water temperature

not exceed 35°C. Temperatures above these may cause the machine to fault or cause

damage to the machine.

Install the machine on a solid and level floor surface ensuring it has at least 20 mm

clearance on each side. The washer must not be installed on any textured floor

coverings (eg carpet, rugs).

Disposal

When disposing of the washer, it is recommended that the lid is removed to

avoid children getting trapped inside, and that the electrical cable is cut off

close to the washer.

Содержание CLEANSMART WL8O60P





















































Результаты поиска

Содержание CLEANSMART WL8O60P

Отзывы:

Бренды по названию

Популярные бренды

Fisher & Paykel CLEANSMART WL8O60P, Руководство по установке

Результаты поиска

Содержание CLEANSMART WL8O60P

Отзывы:

Бренды по названию

Популярные бренды