Fisher & Paykel AquaSmart, Инструкция по установке и эксплуатации

Страница: 38 / 112

Changing pre-set options
Option Adjustment mode
After using your washer a number of times you may want to fine tune some of the options to
suit your wash needs.
There are a number of pre-set options which can be altered:
1
The wash temperatures, including changing the COLD wash temperature to CONTROLLED COLD.
2
The out of balance recovery routine.
3
The number of beeps at the end of the cycle.
4
Resetting to factory default settings.
To enter Option Adjustment mode
1
Turn the machine on at the wall but do not touch POWER.
Touch and hold the KEYLOCK and START / PAUSE
buttons together for 3 seconds. You will hear 3 quick beeps
indicating you have entered Option Adjustment mode and
the machine will show the default setting for the COLD
wash temperature.
The diagram on page 37 shows how the wash cycle icons
relate to the options you can change.
Pages 38 – 41 explain the different options in more detail.
2
Use the dial and buttons on the control panel to make your
changes to the pre-set options.
3
Touch POWER to return to normal mode when you
have finished modifying your options. Your washer will
automatically remember your changes.
Fig.21 Entering Option
Adjustment mode
36
US
CA