Fisher & Paykel AquaSmart, Инструкция по установке и эксплуатации

Страница: 19 / 112

Getting started quickly
Using your washer
These buttons require only a gentle touch to activate.
1
Touch POWER to activate your AquaSmart™ washer.
2
Select your desired wash cycle by turning the SmartTouch Control Dial. The wash cycle icons will
illuminate as you turn the dial, showing which cycle is selected (refer to pages 27 – 31 for details
about the wash cycles).
3
High Efficiency - this allows you to select either a high efficiency (High Efficiency On – to save
water) or conventional cycle (High Efficiency Off – to use more water when needed) (refer to
page 20). Note: only one mode is available for some cycles.
4
Choose your wash options. For example, if you would like a hot wash temperature, touch the
WASH TEMP button until the light next to “Hot” is lit. If you wish to use fabric softener, ensure
SOFTENER is selected in OPTIONS (refer to page 33).
5
Touch START / PAUSE to start the cycle and let AquaSmart™ do the rest for you. The washer will start
to fill with water and automatically select the correct water level and wash action for your load.
Please note: constant interruptions to the cycle, such as touching START / PAUSE will increase the
time taken to complete the cycle and may result in poorer wash performance.
6
Use KEYLOCK to lock the buttons on the control panel, preventing them from being activated
accidently (refer to page 18).
7
DELAY START (available on selected models) allows you to delay the start of your wash by 5 mins
up to 18 hours (refer to page 34).
■ ■
For best fabric and color care, remove your clothes as soon as the cycle has finished.
Important!
Failure to follow the advice in this User Guide may result in damage to your garments, and your
expectations of wash performance may not be met.
Note: selected wash cycles and options may not be available depending on the model of your
washer.
5 3 4 7
17
US
CA