Fischer Panda AGT 4000 PVMV-N, Руководство пользователя

Страница: 35 / 96

The Panda Generator
29.12.04 Panda AGT-DC 4000 PVMV-N s00670 - Chapter A: The Panda Generator Page 29
A.2.8 External components
VCS
The voltaget is regulated by the VCS in
connection with the actuator. The driving
points serve only as security for the fact
that on disturbances of the VCS the upper
and lower point cannot be exceeded.
For the automatic start of the "AGT" gene-
rator a battery monitor is necessary.
The figure shows the control box in that
the VCS and the battery monitors are
installed.
Fig. A.57: VCS
Remote control panell
The remote control panel is necessary for
the controlling of the aggregate and for
the evaluation of the engine/generator
monitoring. In the case of deviation of the
operational data from the desired values
the generator is switched off automati-
cally. The operation of the generator wit-
hout remote control panel is not
permissible.
Fig. A.58: Remotr control panel
Electrical fuel pump
The Panda generator is always supplied
with an external, electrical (12 V of DC)
fuel pump. The fuel pump must be always
installed in the proximity of the tank. The
electrical connections with the lead plan-
ned for it are before-installed at the gene-
rator. Since the suction height and the
supply pressure are limited, it can be
sometimes possible that for reinforcement
a second pump must be installed.
Fig. A.59: External fuel pump