Fischer Panda 10000/9, Руководство пользователя

Страница: 49 / 246

The Panda Generator
9.12.14 Kapitel/Chapter 6: The Panda Generator - Seite/Page 49
Fig. 6.3.2-8: Ventilation Screw Cooling Water Pump Ventilation screw cooling water pump
The ventilation screw above the cooling water pump casing
may not be opened, whilst the generator is running. If this
occurs by mistake, air will be drawn through the opening.
Extensive ventilation of the whole system is then necessary.
Fig. 6.3.2-9: Ventilation Screw Thermostat Housing Ventilation screw thermostat housing
The ventilation screw on the thermostat housing should
occasionally be opened for control purposes. Standing
machinery should principally carry out ventilating.
Fig. 6.3.2-10: Water Cooled Exhaust Manifold Water cooled exhaust manifold
The manifold is cooled by means of the internal cooling
system (freshwater). The cooling water filler necks on the
casing of the manifold may not be opened. These cooling
water necks are only required to fill the motor with cooling
water in cases of repair. The normal cooling water controls
may only be carried out at the external expansion tank.