TRINITY EASY SETUP GUIDE
4
If you use an Ethernet connection,
plug the cord into the port labeled
“ETH” as shown in figure 4.
NOTE: If you plan to connect via
Wi-Fi, see Step 3 for additional
instructions.
If you plan to use a PIN pad, plug
the provided PIN pad cable into
the port labeled “USB”.
STEP 1 (continued)
Figure 4
Figure 5
Lay all cords flat and feed into the
channel guides provided as shown
in figure 4 and reattach the back
cover as shown in figure 5.
Next, insert the power cord into the round
port near the lightning bolt symbol as shown
in Figure 4.
