© 2011 Belwith
®
Products, LLC. | All Rights Reserved | www.firstwatchsecurity.com | 72291 Rev B
10
2. Using SecuRemote™
Setting up and using SecuRemote™ is easy.
2.1 Install the SecuRemote™
1. Unwrap the SecuRemote™ device and take note of the serial number on the side of the
device. You will need it when pairing the device with your smartphone.
2. Attach the mounting plate to a wall or ceiling location close to an A/C outlet using the
screws included in the box OR use the double-sided tape provided to place the device near
the garage door opener OR alternately near the wall counsel.
3. Attach the red and white bell wires of the SecuRemote™ device to (a) the wall counsel
button or (b) to the control connectors on the door opener. Match the wire colors
together. Do not disconnect the existing wires to the garage door unit. (To avoid electric
shock, DO NOT insert wires into A/C outlet!)
4. Plug the SecuRemote™ into an A/C outlet. (Caution: Must plug into a 110 Volt A/C outlet)
5. The blue light will flash three times indicating activity with the device. The green power
light remains on and indicates the device has power and is on.
NOTE: For information regarding installation of the SecuRemote™ for electric gates or strikes
please contact our Customer Service department.
(a)
(b)
3. Attach the
red and
white bell
wires
4. Plug into
an A/C
outlet
5. Ensure the green
power light is on
Mounting Plate
2.
1.
