First Innov PRIMAPROTECT, Уведомление для пользователя и инструкция по установке

Страница: 17 / 28

User notice Primaprotect version 1.0
17
Follow the steps below to fit the sensor bracelet around the wrist :
Figure 17 : Locking the bracelet
6.2.2 Unlocking the sensor bracelet
To unlock the bracelet, pinch the smaller end against the casing to release the catch and
slide the tongue out by pulling on the larger end. Then remove the strap by pulling gently.
It is necessary to carry out step 1 and 3 simultaneously to slide the tongue out
Figure 18 : Unlocking the bracelet
6.2.3 Testing the bracelet
Test the bracelet before each use. Dip the sensor bracelet into the water of the pool. The
alarm goes off within two seconds following the immersion of the bracelet.
When the test of the range is valid, it is possible to renew the procedure from another
location of the pool (as many times as necessary).
6.3 Remote
The remote enables you to arm and temporary disarm the alarm system from a distance
The alarm system Primaprotect can operate with the remote as soon as the recognition
procedure has been carried out (§ 6.1). However the system can always be used with the
magnetic key provided with the kit.
Insert the strap into the slot underneath the bracelet
body and adjust it to the child’s wrist. Do not put it on
too tight. Lock the sensor bracelet.
Slide the tongue out
Pinch the side
of the
bracelet’s body
Pull on the security
clasp
1
2
3