First Degree Fitness TRIDENT Challenge AR, Руководство пользователя

Страница: 11 / 21

11
1.Remove Rubber Fill Plug from the top of the tank.
2.Place a large bucket of water next to the rower and position siphon with the rigid
hose in the bucket and the flexible hose into the tank as shown. Note: Make
sure small breather valve on the top of the siphon is closed before filling.
Note: Where water quality is known to be poor, FDF recommends the use of dis-
tilled water.
3.Begin filling tank by squeezing siphon. Use Level Gauge Decal on side of tank to
measure volume of water in tank.
Note: Failure to set adjuster handle to max prior to filling will cause inaccurate fill
levels and possible leakage .
4.After filling tank to the desired water level, open the valve on the top of the si-
phon to allow excess water to escape.
5.Ensure that Tank Plug is replaced once filling and water treatment procedures
are complete.
Tips on Siphon use : Putting the fill bucket higher than the tank will allow the si-
phon to "self-pump" when adding water to the tank.
Tank Filling and Water Treatment
Use a drop cloth under the tank both when filling the
tank to avoid staining floor or carpet
Caution:
Water Treatment Procedures:
Add Chlorine tablet
.
Note: The amount of water treatment can vary widely depending on the Rower’s
location and exposure to sunlight. DO NOT, UNDER ANY CIRCUMSTANCES USE
OTHER TREATMENT TABLETS OTHER THAN THOSE SUPPLIED WITH YOUR
ROWER. Your rower box contents include 4x water treatment tablets, which is suf-
ficient for several years of water treatment. Treat when water becomes discolored
or shows signs of Algae/Bacterial growth. To purchase additional chlorine tabs,
please consult your nearest regional dealer/distributor or check our website
at www.firstdegreefitness.com