First Choice ESCHER M40, Схема запасных частей

Страница: 5 / 25

5
1. LIFTING THE PACKAGED MACHINE
The machine is transported on a wooden pallet A ,
secured by a cross bar C , and fastened to the pallet by
means of two threaded rods B.
To lift by means of a pallet transfer unit or lift truck,
insert the forks in the positions indicated in the figure.
Before lifting, check the suitability of the equipment.
NOTE:
The material used for packaging, apart from the threaded
rods and the bar, can be recycled or disposed of as
urban waste.
2. LIFTING THE UNPACKAGED MACHINE
By means of a belt
Positioned between the column and the end of the tool
holder shaft, as shown in the figure.
It is advisable to use
a suitable space bar (e.g. a
wooden plank with a minimum section of 25x130 mm)
in order to keep the belt away from the cover so that
it is not damaged.
As the machine is decentred with respect to the point
of suspension
the machine hangs in an off-balanced
position . In no way, however, does this effect the
safety of the operators or the machine.
NOTE:
Avoid oscillations during this operation.
By means of a lift truck
Insert the forks in the positions indicated.
Lift carefully keeping the forks in a horizontal position.
Fork position
Belt
position
Space bar
Fork
position
C
B
A