- 7 -
Rear view of the SeriTek/5PM enclosure:
Hard Drive Installation
There are three steps to install a hard drive.
1. Remove a tray from the enclosure
♦
On the front side of the tray, press the slide lock to the left (on the left side, where the
key hole is) to release the tray latch:
♦
Pull the tray handle forward, then pull out the tray:
Exhaust
Fans
Kensington
Security Slot
AC Power
Receptacle
eSATA / I type
Shielded Connector
Tray Handle will pop-out
Press the slide lock on the left
to release the tray-latch
